KR2SS 14ft Longerons 3-1/2 inched extended firewall width 41inches
This will be photos of my new KR2SS. I purchased a fuselage and main gear from a guy guying a RV6 kit and wanted out of the KR .

I found a Zenth Canopy and cut to fit,

Made Canopy frame

Fitting Canopy to forward deck

Sanded to shape new forward deck, for glassing

Glassed and peel ply ready for removial

Make half a deck mould and glass half a turdle deck

Reverse the mould and glass the other side and glasss together

Cut the Canopy and turtle to match

Here she is in rough form. Basic fuse done, with rudder and H/S made

my own design brakes

Glassing the rudder

Glassing the H/S

Fitting overhauled 0200 - Jan 2016

0200 top view

Fitted Rotec TBI. http://www.rotecradialengines.com/

20th June 2016 Panel Design

July 2020 moving to hanger to sand and paint

to hanger

Attached to tow bar and off to airport

Pin hole Sanding filling sanding sanding

Inverted and Paintings bottom March 21

Paintings fuselage

Moab, Utah

Near Silverton, CO

Canyonlands National Park, UT

Falls In Southern Utah

0200

Moab, Utah

Near Silverton, CO

Canyonlands National Park, UT